CHAPTER 6: PLUMBING 23
Freshwater System
Read the Freshwater system section in the Cruiser & Yacht Owner’s Manual. Your boat is equipped with a pressure
type (demand) freshwater (potable) system. This system can be pressurized two different ways:
1. By connecting the city water inlet to an onshore water supply.
2. By turning on the water pump.
• See the Component Location section of this Supplement for the location of the water pump switch.
• Since the water pump requires DC power, the battery switch must be in the “1”, “2” or “BOTH” position for the
pump to work.
• Only use safe drinking (potable) water in your boat’s freshwater system.
• Only use a sanitary drinking water hose to fill the water tank or connect to city water.
• Never use a common garden hose for drinking water.
WARNING!
!
GALLEY FAUCETWATER TANKWATER HEATER
TRANSOM
SHOWER
WATER
PUMP
ENTERTAINMENT
CENTER SINK
VACUFLUSH
(IF EQUIPPED)
HEAD
SINK
WATER FILL
FITTING
PUMP
SWITCH
To Next Page
Loading...
