CHAPTER 6: PLUMBING 29
Macerator (If Equipped)
To use the macerator to pump waste directly into the water (where regulations permit):
1. Open the underwater discharge seacock.
2. Press both macerator switches at the same time to run the pump. Do not continue running the macerator if the
waste holding tank is empty.
3. Close the underwater discharge seacock when you are done pumping.
NOTICE
Check with local authorities for regulations regarding the legal use of marine head systems.
MACERATOR
HOLDING TANK
VENT
HOLDING
TANK
OVERBOARD DISCHARGE
SEACOCK
TO DOCKSIDE
WASTE PUMP-
OUT FITTING
D
E
T
A
I
L
V
I
E
W
ON DECK
To Next Page
Loading...
