31
Chapter 7: Deck Equipment
Windlass (If Equipped)
Read and follow the manufacturer’s instruction manual supplied in your owner’s packet before using the anchor
windlass for the first time.
• The windlass is controlled from a switch at the helm.
• Make sure that the windlass breaker is turned on before using the anchor windlass.
• To haul the anchor, use engine power (not the windlass) to move the boat to, and directly above, the anchor.
• Use the windlass to dislodge the anchor from the bottom by pulling it straight up.
PRODUCT DAMAGE HAZARD!
• DO NOT pull the boat to the anchor using the windlass or continue to run the windlass if it
has stalled or is overloaded.
CAUTION!
!
To Next Page
Loading...
