Location and Storage
This training device is specifically designed for use in dry, warm indoor areas. It is essential to avoid using or
storing the device in damp or wet environments such as saunas, swimming pools, etc., as well as outdoor
areas like balconies, terraces, gardens, garages, etc. Exposure to high humidity or low temperatures in these
areas may lead to damage to the electronics or the development of corrosion and rust. Please note that no
warranty claims will be accepted for damage of this nature.
When selecting a location for your training equipment, it is important to choose a warm, dry, and level area
both during use and for storage. Additionally, ensure that the training area is adequately ventilated to
facilitate optimal oxygenation during exercise.
Before using the training device following a prolonged period of non-use, it is recommended to check that all
fastenings are secure to ensure safe operation.
Transport
In order to transport your training device simply and safely, the front stand is equipped with transport rollers. To
transport the exerciser, stand at the rear end of the glide frame and grasp the rear cross tube with both hands.
Now tip the training device upwards until the main weight of the training device rests on the transport rollers.
Now you can simply push the device on the transport rollers into the required position. Always make sure that
you have a firm and secure footing when lifting, transporting, and putting down the device.
Transport rollers
Transport, Location and Storage
13
To Next Page
Loading...
Need help?
General
