Mains Adapter
Take the connection cable of the mains adapter (D08) included in the delivery. Plug the connection cable into
the socket on the front of the main frame (A01). Then, connect the mains adapter (D08) to a power socket.
CAUTION:
This device should only be connected to an earthed socket that has been installed by a qualified electrician.
Do not use a socket strip for the connection. If an extension cable is necessary, ensure that it complies with
the VDE regulations and guidelines.
Connecting the Device
CAUTION:
Before connecting the mains adapter to the device, always ensure that you are using the mains adapter
supplied specifically with the device. Using a different mains adapter may result in damage to the electronic
components, for which the manufacturer cannot be held liable.
When connecting the device to the power supply, always connect the power cable to the exerciser first before
plugging it into a power outlet. Likewise, when disconnecting the exerciser from the power supply, always
disconnect the power cable from the mains first.
Switching on the Device
First connect the power cable to the exerciser and then connect the mains cable to the power socket,
the cockpit turns on automatically. If the training device is already connected to the mains, but the cockpit is
in stand-by mode, activate the cockpit by pressing any key or by moving the pedals.
Turning off the Device
When inactive for more than 4 minutes, the cockpit automatically switches to stand-by mode. Once you have
finished your workout you should always disconnect the exerciser from the mains. Always unplug the mains
cable from the wall socket first and then remove the power cable.
Mains connection
15
To Next Page
Loading...
Need help?
General
