To Next PageTo Next PageWhat to do if Maytag AEW3530DD door will not unlock?
If your Maytag oven door won't unlock, it may be because the oven is in self-cleaning mode or is still too hot. Allow the self-clean cycle to complete. The door will not unlock until the unit has cooled to a safe temperature. Do not force the door open, as this will void the warranty. You can blow cool air on the door latch area to quicken the cooling process.
What to do if my Maytag AEW3530DD Oven is not operating?
If your Maytag oven isn't operating, a programming error or a power outage could be the cause. Try shutting off the power to the oven for five minutes by switching off the circuit breaker, then reset the breaker and try the oven again. Also, verify that there is power present at the unit and that the circuit breaker is not tripped. Replace the household fuse if necessary, but do not increase fuse capacity.
Why does my Maytag Oven smoke and have an odor when I use it for the first few times?
Minor smoking or odor is normal during the first few uses of your Maytag oven. Ensure the area is well-ventilated and consider running a self-clean cycle to help eliminate the smell.
What to do if clock and timer are not working on Maytag Oven?
If the clock and timer on your Maytag oven aren't working, it could be due to a power outage. Verify that power is present at the unit and that the circuit breaker is not tripped. Replace the household fuse, but do not increase fuse capacity.
How to troubleshoot a Maytag AEW3530DD with no bake element operation?
If the bake element in your Maytag oven isn't working, it could be due to a loose wire connection or a broken wire. Check the element for continuity and replace it if it has failed. Verify that all connections are clean and tight, and replace any broken wires.
How to fix Maytag AEW3530DD Oven light that does not operate?
If the oven light in your Maytag oven isn't working, the bulb may have failed, or there may be a wiring issue, a failed light socket, or a failed light plunger. First, check the lamp and replace it if necessary. Then check for broken, loose, or dirty connections. After that check the light socket and the plunger for continuity.
Why is the broil element not working on my Maytag Oven?
If the broil element in your Maytag oven isn't working, it could be due to a loose wire connection or a broken wire. Check the element for continuity and replace it if it has failed. Verify that all connections are clean and tight, and replace any broken wires.
General| Brand | Maytag |
|---|---|
| Fuel Type | Electric |
| Number of Oven Racks | 2 |
| Self-Cleaning | Yes |
| Convection Cooking | No |
| Model | AEW3530DD |
| Color | Stainless Steel |
| Width | 29.875 inches |
