PAGE 2
FOR SERVICE TECHNICIAN’S USE ONLY
DO NOT REMOVE OR DESTROY
MAYTAG CONTROL PANEL (features and appearances may vary between models)
Rotating the cycle selector knob toggles on and off each corresponding
cycle indicator. (Features and appearances vary between models).
“power/cancel” button: press once to turn
off indicator. Press twice to exit service
diagnostic mode and return to standby mode.
“start/pause” button: begin or
continue test. Pressing button
toggles indicator on and off.
“time adjust (–)” button:
pressing the button toggles the
Status and LSDs on and off.
“time adjust (+)” button:
pressing button toggles
the MSD on and off.
Figure 1 - User Interface Test
Press each “option” button to toggle its
respective indicator on and off. (Some options
may not be available on all models).
“drum light” button:
pressing button toggles
indicator on and off.
Press each “modifier” button to
toggle its respective indicators on
and off. (Some modifiers may not
be available on all models).
To Next Page
Loading...
