Useful operation hints
Useful operation hints
Useful operation hints
For optimal operation, instruct your customer to check that the water
temperature, pH and chlorine conform to the following recommended levels:
• pH: 7.0 – 7.8
• Chlorine: max 4 ppm / NaCI 5000 ppm
• Temp.: 6º – 34ºC
Quick answers to common customer questions
How should I set up the Dolphin for operation?
1. Connect the cable to the power supply, ensuring the power supply is positioned
at least 3m from the pool’s edge and is in the shade.
CAUTION: Never use an extension cable.
2. Release the minimum required floating cable length to ensure entire pool
coverage. Leave excess cable coiled outside the pool.
3. Place the Dolphin in the pool. For models with combined brushes (CB) or wonder
brushes (WB), squeeze the brushes until they are soaked with water.
How should I clean the Dolphin
?
After each cleaning cycle, wash the filter bag or cartridge under running water.
Clogged filters reduce scanning and cleaning efficiency.
Once every two months, wash the filter bag (M3 only) in a washing machine
using a regular synthetic wash cycle.
How should I store the Dolphin
?
After each cleaning cycle, take the Dolphin out of the water and store away from
direct sunlight, excessive heat or frost, to prevent accelerated wear and tear on
plastic parts. Store the Dolphin in a shady place on its Caddy or stand or, if not on
the Caddy/stand, place the Dolphin upside down.
To Next Page
Loading...
