Maytronics Supreme M3 - 3. Dismantling the Cable; Step 3.1 Dismantle the 2 screws on the cable holder; Step 3.2 Remove the float from the motor unit; Step 3.3 Release the cable from the motor unit, using the Terminal Key

Supreme M3 Disassembly Instructions
3. Dismantling the Cable
Step 3.1
Dismantle the
2 screws on
the cable
holder.
Step 3.2
Remove the
float from the
motor unit.
Step 3.3
Release the
cable from the
motor unit,
using the
Terminal Key.
Step 3.4
Unplug the
cable.
Note:
PVC models
have two
floats on
the motor
unit.