Maytronics Supreme M3 - Step 2.5 Put the side panel with the wheel on the drive motor side; Step 2.6 Press on the bottom of the side panel to fit the clips into their places; Step 2.7 Secure the side panel in place with 4 KA40 X20 screws

Supreme M3 Assembly
Step 2.5
Put the side
panel with the
wheel on the
drive motor
side.
Step 2.6
Press on the
bottom of the
side panel to
fit the clips
into their
places.
Step 2.7
Secure the side
panel in place
with 4
KA40X20
screws.
Note:
The side
panel with
the wheel
should be in
the drive
motor side