Mazda CX-5 2015 - Bluetooth Preparation; Device Programming (Pairing)

Black plate (319,1)
Conversation volume and the volume of the voice guidance and ringtone can each be set in
advance.
1. Touch the
on-screen tab to display the Bluetooth
®
setting screen.
2. Touch the
on-screen button to display the volume adjustment screen.
3. (Volume up) Touch the
on-screen button.
(Volume down) Touch the
on-screen button.
4. Prompt: “Phone call will be at this volume.” or “Voice guidance will be at this
volume.”
NOTE
The volume of the audio unit cannot be adjusted while Bluetooth
®
Hands-Free is being used.
qBluetooth® Preparation
Device programming (Pairing)
To use Bluetooth
®
audio and Hands-Free,
the device equipped with Bluetooth
®
has
to be programmed to the unit using the
following procedure. A maximum of
seven devices including Bluetooth
®
audio
devices and Hands-Free mobile phones
can be programmed.
NOTE
l
For your safety, a device can be
programmed only when the vehicle is
parked. If the vehicle starts to move, the
pairing procedure will end. Park the car in
a safe place before programming.
l
The communication range of a Bluetooth
®
equipped device is about 10 meters (32 ft)
or less.
CAUTION
Some Bluetooth
®
mobile devices are
not compatible with the vehicle.
Consult an Authorized Mazda Dealer,
Mazda's call center or Web support
center for information regarding
Bluetooth
®
mobile device
compatibility:
Ø U.S.A.
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
Ø Canada
Phone: 800-430-0153
Web: www.mazdahandsfree.ca
Ø Mexico
Center of Attent ion to Client (CAC)
Phone: 01-800-01-MAZDA
Web: www.mazdamexico.com.mx
Pairing Procedure
1. Press the phone button (
) on the
audio unit or commander switch .
2. Touch the
on-screen tab.
3. Touch the
on-screen
button. The list of pairing devices is
displayed.
Interior Features
Bluetooth®
5-79
CX-5_8DR3-EC-14A_Edition3 Page319
Monday, June 30 2014 3:39 PM
Form No.8DR3-EC-14A