Black plate (408,1)
Vanity mirror lights
3. Install the new bulb in the reverse order
of the removal procedure.
Luggage compartment light
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens unit by
carefully prying on the edge of the lens
unit with the flathead screwdriver.
2. Disconnect the electrica l connector
from the bulb by pressing the tab on
the connector with your finge r and
pulling the connector.
CAUTION
When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.
6-48
Maintenance and Care
Owner Maintenance
CX-5_8DR3-EC-14A_Edition3 Page408
Monday, June 30 2014 3:40 PM
Form No.8DR3-EC-14A
To Next Page
Loading...
