NOTE
l
After starting the engine, the push
button start indicator light (amber)
turn off and the ignition is in the ON
position.
l
(SKYACTIV-G 2.0, SKYACTIV-G
2.5)
After pressing the push button start
and before the engine starts, the
operation sound of the fuel pump
motor from near the fuel tank can be
heard, however, this does not
indicate a malfunction.
NOTE
l
(SKYACTIV-D 2.2)
l
When starting the engine, do not
release the clutch pedal (manual
transaxle) or the brake pedal
(automatic transaxle) until the
glow indicator light in the
instrument cluster turns off and
the engine starts, after pressing the
push button start.
l
If the clutch pedal (manual
transaxle) or the brake pedal
(automatic transaxle) is released
before the engine starts, depress
the clutch pedal (manual
transaxle) or the brake pedal
(automatic transaxle) again and
press the push button start to start
the engine.
l
If the ignition is left switch ed ON
for a long period of time without
the engine running after the glow
plugs are warmed up, the glow
plugs may warm up again whic h
will illuminate the glow indicator
light.
l
The starter does not rotate until
the glow indicator light turns off.
4-6
When Driving
Start/Stop Engine
To Next Page
Loading...
