Mazda CX-5 - Page 155

8. After starting the engine, let it idle for
about ten seconds (Prohibited in
Germany).
NOTE
l
(Germany)
Drive immediately after starting the
engine. However do not use high
engine speeds until reaching the
operating temperature.
(SKYACTIV-G 2.0, SKYACTIV-G
2.5)
l
Whether the engine is cold or war m,
it should be started without the use
of the accelerator.
l
If the engine does not start the first
time, refer to Starting a Flooded
Engine under Emergency Starting. If
the engine still does not start, have
your vehicle inspected by an
Authorised Mazda Repairer (page
7-24).
l
(SKYACTIV-D 2.2)
If the ambient temperature is lower
than about
_
10 °C (14 °F), the
maximum engine speed may not be
attained for about three minutes after
the engine starts to protect the
engine.
NOTE
l
(Manual transaxle vehicle with i-
stop function)
If the engine has stopped due to
stalling, it can be restarted by
depressing the clutch pedal within 3
seconds of the engine stopping.
The engine cannot be restarted even
if the clutch pedal is depressed under
the following conditions:
l
The driver's door is open.
l
The driver's seat belt is
unfastened.
l
The clutch pedal is not released
completely after the engine
stalled.
l
The clutch pedal is depressed with
the engine not stopped
completely.
When Driving
Start/Stop Engine
4-7