How to Set the Speed
1. Adjust the vehicle speed to the desired
setting using the accelerator pedal.
2. Headway control begins when the
SET
or SET switch is pressed.
The set speed and the inter-vehicle
distance display filled with white lines
are displayed. The Mazda Radar Cruise
Control (MRCC) indicator light (green)
is indicated simultaneously.
Travel status Display
During travel at constant
speed
During travel under
headway control
NOTE
l
If a vehicle ahead is detected while
travelling at a constant speed, the
vehicle-ahead indication is displayed
and headway control is performed.
Additionally, when a vehicle ahead is
no longer detected, the vehicle-ahead
indication turns off and the system
switches back to travel at const ant
speed.
l
If you are driving the vehicle at a
speed faster than the set speed,
headway control on the vehicle
ahead is not possible Adjust the
system to the desired vehicle speed
using the accelerator pedal.
l
(European models)
When switching to a passing lane
and operating the direction indicator,
the system provides more
acceleration automatically if it
determines that more acceleration is
required. Drive while being careful
of the road ahead because you could
approach the vehicle ahead too
closely.
4-164
When Driving
i-ACTIVSENSE
To Next Page
Loading...
