qActivation/Deactivation
With adjustable speed limiter
To activate the system, press the ON/OFF
switch. The cruise main indicator light
(amber) illuminates.
Refer to Warning/Indicator Lights on page
4-33.
To deactivate the system, press the switch
again.
The cruise main indicator light (amber)
turns off.
Without adjustable speed limiter
To activate the system, press the ON
switch. The cruise main indicator light
(amber) illuminates.
Refer to Warning/Indicator Lights on page
4-33.
To deactivate the system, press the OFF
switch.
The cruise main indicator light (amber)
turns off.
WARNING
Always turn off the cruise control
system when it is not in use:
Leaving the cruise control system in
an activation-ready state while the
cruise control is not in use is
dangerous as the cruise control could
unexpectedly activate if the activation
button is accidentally pressed, and
result in loss of vehicle contro l and an
accident.
NOTE
When the ignition is switched OFF, the
system status before it was turned off is
maintained. For examp le, if the ignition
is switched OFF with the cruise control
system operable, the system will be
operable when the ignitio n is switched
ON the next time.
qTo Set Speed
1. (With adjustable speed limiter)
Activate the cruise control system by
pressing the ON/OFF switch.
The cruise main indicator light (amber)
illuminates.
Refer to Warning/Indicator Lights on
page 4-33.
(Without adjustable speed limiter)
Activate the cruise control system by
pressing the ON switch.
The cruise main indicator light (amber)
illuminates. Refer to Warning/Indicator
Lights on page 4-33.
2. Accelerate to the desired speed, which
must be more than 25 km/h (16 mph).
3. Set the cruise control by pressing the
SET
or SET switch at the desired
speed. The cruise control is set at the
moment the SET
or SET switch is
pressed. Release the accelerator pedal
simultaneously. The cruise set indicator
light (green) illuminates.
4-208
When Driving
Cruise Control
To Next Page
Loading...
