NOTE
l
The cruise control speed setting
cannot be performed under the
following conditions:
l
(Automatic transaxle)
The selector lever is in the P or N
position.
l
(Manual transaxle)
The shift lever is in the neutral
position.
l
The parking brake is applied.
l
(Vehicles with adjustable spee d
limiter)
The ON/OFF switch for the
adjustable speed limiter is
pressed.
l
Release the SET or SET switch
at the desired speed, otherwise the
speed will continue increasing while
the SET
switch is pressed and
held, and continue decreasing while
the SET
switch is pressed and held
(except when the accelerator pedal is
depressed).
l
On a steep grade, the vehicle may
momentarily slow down while
ascending, or speed up while
descending.
l
Cruise control will cancel if the
vehicle speed decreases below 21
km/h (13 mph) when cruise is
activated, such as when climbing a
steep grade.
l
Cruise control may cancel at about
15 km/h (9 mph) below the preset
speed (such as may happen when
climbing a long, steep grade).
For the Type A meter, the vehicle speed
preset using the cruise contr ol is displayed
in the instrument cluster.
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the SET
switch and hold it. Your
vehicle will accelerate.
Release the switch at the speed you want.
Press the SET
and release it
immediately to adjust the preset speed.
Multiple operations will increase the
preset speed according to the number of
times it is operated.
Increasing speed with a single SET
operation
Meter display for vehicle speed indicated
in km/h: 1 km/h (0.6 mph)
Meter display for vehicle speed indicated
in mph: 1 mph (1.6 km/h)
To increase speed using accelerator
pedal
Depress the acceler ator pedal to accelerate
to the desired speed. Press the SET
or
SET - switch and release it immediately.
When Driving
Cruise Control
4-209
To Next Page
Loading...
