Mazda CX-5 - Page 488

2. Turn the audio control dial and select a
desired mode.
Display Mode Function
PAIR
DEVICE
Pairing mode
Bluetooth
®
audio device pairing
LINK
CHANGE
Link change
mode
Changing link to
Bluetooth
®
audio
device
PAIR
DELETE
Pairing
deletion mode
Deleting link to
Bluetooth
®
audio
device
DEVICE
INFO
Device
information
display mode
Displaying vehicle's
Bluetooth
®
unit
information
3. Press the audio control dial to
determine the mode.
Bluetooth
®
audio device pairing
Any Bluetooth
®
audio device must be
paired to the vehicle's Bluetooth
®
unit
before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
Bluetooth
®
audio devices and Hand s-Free
mobile phones can be paired to one
vehicle.
NOTE
l
If a Bluetooth
®
device has already
been paired to the vehicle as a
Hands-Free mobile phone, it does
not need to be paired again when
using the device as a Bluetooth
®
audio device. Conversely, it does not
need to be paired again as a Hands-
Free mobile phone if it has alrea dy
been paired as a Bluetooth
®
audio
device.
l
Device registration can also be done
using voice recognition.
Concerning the operation of a Bluetooth
®
audio device itself, refer to its instruction
manual.
Some Bluetooth
®
audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
pairing procedure differs depending on
whether it has a PIN code or not.
Pairing a Bluetooth
®
audio device
which has a four-digit PIN code
1. Using the audio control dial, select the
pairing mode “PAIR DEVICE” in the
“BT SETUP” mode. (Refer to
“Bluetooth
®
audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode. After “ENTER
PIN” is displayed on the audio display
for three seconds, “PIN 0000” is
displayed and the PIN code can be
input.
5-98
Interior Features
Bluetooth®