Mazda CX-5 - Page 522

NOTE
Some Bluetooth
®
audio devices need a
certain amount of time before the “
”
symbol is displayed.
3. Press the USB/AUX button (
)to
switch to the Bluetooth
®
audio mode
and start playback.
If the current device version is lower
than AVRCP Ver. 1.3: “BT Audio” is
displayed.
If the current device is AVRCP Ver. 1.3:
The playback time is displayed.
NOTE
l
If the Bluetooth
®
audio device does
not begin playback, press the Play/
Pause button (5).
l
If a call is received on a Hands-Free
mobile phone during playback from
the Bluetooth
®
audio device, the
playback is stopped. Playbac k from
the Bluetooth
®
audio device resumes
after the call ends.
Playback
1. To listen to a Bluetooth
®
audio device
over the vehicle's speaker system,
switch the mode to Bluetooth
®
audio
mode. (Refer to “Switching to
Bluetooth
®
audio mode”)
2. To stop playback, press the Play/Pause
button (5).
3. Press the button again to resume
playback.
Selecting a file (track)
Selects the next file (track)
Short-press the track up button (
)or
turn the file dial clockwise.
Selects the beginning of the current file
(track)
Short-press the track down button (
)
or turn the file dial anticlockwise.
Fast-forward/Reverse (AVRCP Ver.
1.3)
Fast-forward
Press and hold the fast-forward button
(
).
Reverse
Press and hold the reverse down butt on
(
).
Switching the display (AVRCP Ver. 1.3)
The information displayed on the audio
display changes as follows each time the
text button (
) is pressed during
playback.
Button
Information displayed
on audio display
Elapsed time
Album name
Song name
Artist name
NOTE
l
If title information is n ot available,
“NO TITLE” is displayed.
l
This unit cannot display some
characters. Characters which cannot
be displayed are indicated by an
asterisk (
).
5-132
Interior Features
Bluetooth®