NOTE
The tyre sealant can be used at outside
temperatures down to
_
30 °C (
_
22 °F).
In extremely cold temperatures (0 °C
(32 °F) or below), the tyre sealant
hardens easily and injection of the
sealant will be difficult. Warm the
sealant inside the vehicl e before doing
the injection work.
6. Remove the cap from the bottle. Screw
on the injection hose with the bottle's
inner cap left on to break the inner cap.
Injection hose
Bottle
7. Remove the valve cap from the flat
tyre. Press the back of a valve core tool
to the core of the tyre valve and bleed
all the remaining air.
Valve core tool
Valve
Valve cap
CAUTION
If there is air remainin g in the tyre
when the valve core is removed, the
valve core could fly out. Remove the
valve core careful ly.
8. Turn the valve core anticlockwise with
the valve core tool and remove the
valve core.
Valve
Valve core
NOTE
Store the valve core in a place where it
will not get dirty.
9. Remove the plug from the injection
hose and insert the injectio n hose into
the valve.
Plug
Injection hose
7-10
If Trouble Arises
Flat Tyre
To Next Page
Loading...
