10. Hold the bottom of the bottle upright,
squeeze the bottle with your hands,
and inject the entire amount of tyre
sealant into the tyre.
Valve
NOTE
The tyre sealant cannot be reused.
Purchase a new tyre sealant kit at an
Authorised Mazda Repairer.
11. Pull out the injection hose from the
valve. Reinsert the valve core into the
valve and turn it clockwise to install
it.
NOTE
Do not throw away the empty tyre
sealant bottle after use. Return the
empty tyre sealant bottle to an
Authorised Mazda Repairer when
replacing the tyre. The empty tyre
sealant bottle will need to be used to
extract and dispose of the used sealant
from the tyre.
12. Adhere the speed restriction sticker to
the speedometer.
WARNING
Attach the speed restriction sticker in a
place where it can be viewed easily by
the driver:
l
Applying the speed restriction
sticker to the steering wheel is
dangerous as it could interfere with
the air bag deployment and resul t
in serious injury.
l
Do not apply the sticker to any
position other than the position
indicated in the illustration of the
speedometer.
If Trouble Arises
Flat Tyre
7-11
To Next Page
Loading...
