CAUTION
If the key warning indicator light
illuminates or the push button start
indicator light (amber) flashes, the
engine may not start. If the engine
cannot be started, try starting it using
the emergency operation for starting the
engine, and have the vehicl e inspected
at an Authorised Mazda Repairer as
soon as possible.
Refer to Emergency Operation for
Starting the Engine on pag e 4-10.
qIf the adaptive LED headlights
warning light (amber) illuminates
(Type A)
í
This light turns on if there is a
malfunction in the adaptive LED
headlights. Have your vehicle inspected
by an expert repairer, we recommend an
Authorised Mazda Repairer.
qIf the high beam control system
(HBC) warning light (amber)
illuminates
í
This light turns on if there is a
malfunction in the high beam control
system (HBC). Have your vehicle
inspected by an expert repai rer, we
recommend an Authorised Mazda
Repairer.
qIf the diesel particulate filter
warning indication/indicator light
is indicated
í
Type A
When “Soot Accumulation in DPF too
high” is indicated
The particulate mat ter (PM) cannot be
removed automati cally and the amount of
collected PM reaches a specified amount.
After the engine has sufficiently warmed
up (engine coolant temperature of 80 °C
or more), depress the accelerator pedal
and drive the vehicle at a speed of 20
km/h or more for about 15 to 20 minutes
to eliminate the PM.
7-42
If Trouble Arises
í
Some models.
Warning/Indicator Lights and Warning Sounds
To Next Page
Loading...
