NOTE
4. The setting change is compl eted by
doing any one of the following:
l
Switch the ignition to ACC or
ON.
l
Close the driver's door.
l
Open the liftgate.
l
The key is not operated for 10
seconds.
l
Press any button except the
LOCK button on the key.
l
A request switch is pressed.
l
(With theft-deterrent system)
The hazard warning lights flash
when the theft-deterrent system is
armed or turned off.
Refer to Theft-Deterrent System
(European models) on page 3-48.
Refer to Theft-Deterrent System
(Except European models) on page
3-52.
l
(With double locking system)
Pressing the request switch twice
within 3 seconds will activate the
double locking system. Refer to
Double Locking System on page
3-12.
NOTE
l
The setting can be changed so that
the doors and the liftgate are locked
automatically without pressing the
request switch.
Refer to Personalisation Features on
page 9-12.
(Auto-lock function)
A beep sound is heard when all
doors and the liftgate are closed
while the advanced key is being
carried. All doors and the liftgate are
locked automatically after about
three seconds when the advanced
key is out of the operational range.
Also, the hazard warning lights flash
once. (Even if the driver is in the
operational range, all doors and the
liftgate are locked automatically after
about 30 seconds.) If you are out of
the operational range before the
doors and the liftgate are completely
closed or another key is left in the
vehicle, the auto-lock function will
not work. Always make sure that all
doors and the liftgate are closed and
locked before leaving the vehicle.
The auto-lock function does not
close the power windows.
Before Driving
Doors and Locks
3-15
To Next Page
Loading...
