Mazda CX-7 2007 - Page 98

BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–74
5. After temporarily installing new parts, make sure the related parts fit properly.
6. Install the rear pillar (outer).
Note
• When replacing the rear pillar (outer) and corner plate separately, weld the 5 locations indicated by (A).
End Of Sie
BM: TRUNK FLOOR PAN
CUT-AND JOIN
LOCATION
CORNER
PLATE
REAR PILLAR
(OUTER)
10
(A)5
210mm
{8.27in}
acxuub00000128
3419-1U-06C(09-80B).fm 74 ページ ２００６年３月２４日 金曜日 午後４時４７分