BODY STRUCTURE [PLASTIC BODY PARTS]
09-80E–3
09-80E
POLYPROPYLENE BUMPER REPAIR[PLASTIC BODY PARTS]
id09801 1600200
End Of Sie
Scratch on paint only
Hole or crack through surface
Crack more than 100 mm
{3.94in} long or completely
broken
Bumper
surface
Bumper
surface
not visible visible
Remove paint
Smooth damaged area
Apply aluminium tape to
reverse side of bumper
Plastic weld damaged area
Rough sand damage area
Degrease damaged area
Apply repair agent to
damaged area and let dry
Sand damaged area
smooth
Sand dam-
aged area
Apply polypropylene primer to damaged
area and let dry
Spray primer surfacer on damaged area
and let dry
Spray primer surfacer on
bumper and let dry
Sand surface of bumper
Sand partial or complete surface of bumper
Degrease bumper
Spray matching body color paint on bumper and let dry
Replace damaged
Bumper
Spray entire bumper
surface with
polypropylene primer
Apply polypropylene primer
to damaged area
am8rrb00000049
3419-1U-06C(09-80E).fm 3 ページ ２００６年３月２２日 水曜日 午後６時２８分
To Next Page
Loading...
