MB Connect Line mbNET MDH816 User Manual

Page 174 of 226
Version: 3.3.5 – DR05 – 23.03.2017
A “network to network” connection can be created here. Depending on the authentication method, the client re-
ceives an IP address from a defined range or each subscriber specifies its requested address.
Example:
LAN mbNET Client mbNET Server LAN
[192.168.99.100]<>ROUTING<>[10.1.0.2] VPN – TUNNEL [10.1.0.1]<>ROUTING<>[192.168.0.100]
If „Wait for incoming Connection“ was selected, then this mbNET is in Server Mode and is called “Server” in
the further documentation, otherwise if “Connect immediately” was selected, then the mbNET is in Client
Mode and is called “Client”.
Tab
Label
Description
Connection Set-
tings
Active
Check this box to activate the OpenVPN con-
nection.
Connection name
Enter a name for the connection in the input
field.
Connection type
Select the connection type via the drop-down
field.

MB Connect Line mbNET MDH816 Specifications

General

Brand	MB Connect Line
Model	mbNET MDH816
Category	Network Router
Language	English