EN
15
Ending charging process
The charging process is ended by releasing the vehicle and disconnecting the charging cable. Details
of this are described in the manual provided by the vehicle manufacturer. The charging process can
also be ended by logging off using the RFID card used for the authorisation process.
1. Disconnect the charging cable from the vehicle and coil the charging cable around the Wallbox.
Storing the charging cable
1. Coil the charging cable around the Wallbox.
2. Place the charging cable plug in its holder 1 for
safekeeping.
Note
The form of the illustration may differ
depending on the version of the Wallbox.
To Next Page
Loading...