To Next PageTo Next Page
Need help?Do you have a question about the MC Technologies MC100 Terminal and is the answer not in the manual?
General| Operating Voltage | 9-36 VDC |
|---|---|
| Operating System | Linux |
| Storage | 512 MB Flash |
| Cellular | 4G LTE |
| GNSS | GPS, GLONASS |
| Interfaces | Ethernet, USB |
| Protocols | MQTT, Modbus |
| Processor | ARM Cortex-A7 |
| USB Ports | 1 x USB 2.0 Host |
| Serial Ports | 1x RS-232/RS-485 |
| Power Supply | 9-36V DC |
Essential safety guidelines for product operation, handling, and environment.
Critical technical limits and operator duties for safe and compliant device operation.
Guidelines for safe product transport, storage, and adherence to environmental regulations.
Fundamental safety precautions including ESD protection and hazard avoidance.
Lists the different MC100 terminal and gateway models available.
Specifies supply voltage, dimensions, temperature range, and housing materials.
Details supported networks, transmission rates, and antenna connections.
Describes the device's physical ports, connectors, and LED status indicators.
Guides users through mounting the antenna and properly inserting the SIM card.
Explains power connection and accessing the device's web configuration interface.
Details configuring the SIM for network connectivity and verifying the connection.
Covers accessing and using the command-line interface for device management.
Instructions for enabling, using Node-RED, and visualizing data with dashboards.
Explains reading and controlling GPIO and SensT2 analog/digital signals via Node-RED.
Guides on setting up secure VPN connections using OpenVPN.
Details the setup and usage for Modbus and WMBus communication.
Instructions for interacting with 1-Wire devices via the system interface.
Outlines steps for updating the MC100 firmware and packages.
Describes how to restore the device to its default factory settings.
Covers routine maintenance, fault finding, and proper equipment disposal.
