EasyManua.ls Logo

MC Technologies MC100 Terminal - Network Connection Setup and Verification

MC Technologies MC100 Terminal
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
14
For security reasons, click on "Go to Password Configuration" in the yellow window and
change/set the "Password" here.
9.5 Setting up the SIM and establishing a connection
Click on "Network" in the left menu and then on "Interfaces".
Click on the "EDIT" button at the "MOBILE" interface.
Setting APN:
1. Change Protocol to: UMTS/GPRS/EV-DO. (Supports LTE-connection)
2. Click on “SWITCH PROTOCOL.”
3. Change Modem device to “/dev/ttyUSB2”
4. Enter the access data, APN, user and password for data transmission in your mobile
network.
5. Enter the PIN number of your SIM card. Leave the entry field empty for a SIM card
without PIN.
You can obtain the data from your mobile phone provider. Many providers do not require
additional entries for user and password.

Table of Contents

Related product manuals