MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
56
18 Factory reset
WARNING:
All customized setting will be reset to factory. Make sure you are directly
connected to the MC100.
To reset the MC100 (approximatly 5 minutes):
Locate the Reset button on the back of your MC100 device.
Use the pointed end of a paperclip or similar object to press and hold the Reset
button.
Then while still holding the button, connect the power.
After approximately 5 seconds the red LED will start flashing, and only the green LED
5 will be lit.
After 2-3 minutes the red light will flash and then the green LED 5 will lit again.
Wait for the device to fully reset and restart.
At the end of the procedure the green LED 5 will turn off and the green LED 4 will
start flashing
The default factory settings have been restored.
To Next Page
Loading...
