MC Technologies MC100 Terminal - MC100 Senst2; Analog Inputs; Write Analog Inputs; Pt100;1000

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
22
10.2 MC100 SensT2
Analog Inputs 10.2.1
1. Add the inject node.
2. Add voltage input/current input node.
3. Add Debug node.
4. Wire (as shown in picture) and Deploy.
Write Analog Inputs 10.2.2
1. Add Inject node, double click on it and change the payload to Numbers
and give the analog Value (= Current in [0-20]mA*1000).
2. Add MC100 SensT2 current output node.
3. Wire and Deploy.
PT100/1000 10.2.3
1. Add the Inject node
2. Add MC100 SensT2 RTD
3. Double click on MC100 SensT2 RTD node to open the settings menu and
choose RTD and Output type.
4. Add Debug node(Change name if wanted)
5. Wire and Deploy