MC Technologies MC100 Terminal - Modbus Command Line Tool; Installation

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
48
7. Click on the edit button near Server to configure the Modbus device.
8. Change Type to Serial Expert.
9. Change Serial port to /dev/ttymxc4
10. Make sure, that the Serial Type is RTU-BUFFERED and not RTU.
11. Deploy.
By clicking on Debug, messages fetched from the device should be seen.
14.2 Modbus command line tool
Installation 14.2.1
To install the modbus command line tool you have to install the „mcmodbus.ipk‟ from the
MC-Technologies update server.