MC Technologies MC100 Terminal - Analog and Digital IO Readout

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
20
10 Readout analog and digital IO's via Node-RED website interface
10.1 MC100 GPIO
Analog Inputs (mA/V) 10.1.1
1. Add the inject node
2. Add voltage input/current input node
3. Add Debug node.
4. Wire and Deploy.
Digital Inputs 10.1.2
1. Add the inject node.
2. Add the digital inputs node.
3. Double click on MC100 GPIO digital input node to open the settings menu
and choose a Digital input.
4. Add Debug node (change name if wanted).
5. Wire and Deploy.
Digital Outputs 10.1.3
1. Add the Inject node.
2. Add the Digital output node.
3. Double click on MC100 GPIO digital output node to open the settings
menu and choose a Digital input.
4. Add Debug node (change name if wanted).
5. Wire and Deploy.