EasyManua.ls Logo

McCulloch M3816 - Technical Data Sheet; Specifications and Levels

McCulloch M3816
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
TECHNICAL DATA SHEET
Engine M3816 M4218
Cylinder volume, cm
3
38 42
Stroke, mm 32 32
Idle speed, rpm 3,000 3,000
Recommended max.
speed, unloaded, rpm 13,000 13,000
Power, kW 1,6 1,7
Ignition system
Spark plug Torch R7
Electrode gap, mm 0,5
Fuel and lubrication system
Fuel capacity, litre 0,38
Oil pump capacity at
8500 rpm, ml/min 4 -- 8
Oil capacity, litre 0,2
Type of oil pump Automatic
Weight
Without bar and chain, kg 4,8
BAR CHAIN
Length Pitch Max
Inches Inches Tip Radius
16 0,375 7T Oregon 91VJ
18 0,375 7T Oregon 91VJ
16 0,375 7T Oregon 91PJ
18 0,375 7T Oregon 91PJ
16 0,375 7T Oregon 91VG
18 0,375 7T Oregon 91VG
16 0,375 7T Oregon 91PX
18 0,375 7T Oregon 91PX
Noise levels M3816 M4218
Equivalent (see note 1)
noise pressure level at
operators ear, measured
according to relevant
international standards,
dB(A) 97 97
Equivalent (see note 1)
noise power level,
measured according to
relevant international
standards, dB(A) 106 106
Vibration levels
(see note 2)
Front handle, m/s
2
5,5 5,5
Rear handle, m/s
2
8,5 8,5
Chain/bar
Standard bar length, in/cm 16/40 18/45
Recommended bar lengths,
in/cm 16/40 18/45
Usable cutting length, in/cm 15,5/39 17,5/44
Chain speed at maximum
power, m/sec 19 19
Pitch, inches 0,375 0,375
Thickness of drive link, mm 1,3 1,3
No. of teeth on drive sprocket 6 6
Note 1: Equivalent noise level is, according to
ISO 22868, calculated as the time--weighted en-
ergy total for noise levels under various working
conditions with the following time distribution,
1/3 idle, 1/3 full load, 1/3 full speed.
Note 2: Equivalent vibration level is, according
to ISO 22867, calculated as the time--weighted
energy total for vibration levels under various
working conditions with the following time dis-
tribution: 1/3 idle, 1/3 full load, 1/3 full speed.
0,375
85q 30q
0q
16/40:56
18/45/62
0,050/1,3 5/32 / 4,0 0,025/0,65
91VJ
in/cm :dl
91PJ
0,375
0,050/1,3
5/32 / 4,0
85q
30q
0q 0,025/0,65
16/40:56
18/45/62
91VG
0,375
0,050/1,3
5/32 / 4,0
85q
30q
0q 0,025/0,65
16/40:56
18/45/62
91PX
0,375
0,050/1,3
5/32 / 4,0
85q
30q
0q 0,025/0,65
16/40:56
18/45/62

Table of Contents

Related product manuals