Need help?Do you have a question about the McIntosh C50 and is the answer not in the manual?
General| Signal to Noise Ratio | 100dB |
|---|---|
| Output Impedance | 200 ohms |
| Power Consumption | 50 Watts |
| Frequency Response | 20Hz to 20, 000Hz +0, -0.5dB |
| Total Harmonic Distortion | 0.002% |
| Dimensions | 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) |
| Maximum Output Voltage | 16V RMS (Balanced), 8V RMS (Unbalanced) |
| Gain | 15dB |
| Phono Input Impedance | 47K Ohms |
| Inputs | 6 (including phono) |
| Outputs | 3 unbalanced, 2 balanced |
To Next Page
