30
How to Operate the MVP881BR, con’t
7 times normal speed. To return to normal playback
press the (Play) Push-button.
Stop Mode
Press the < (Stop) Push-button once to stop disc play-
back, known as Resume Stop. Press (Play) and the
disc will start playing again from the disc time where
Stop was pressed. Press < (Stop) twice for a complete
stop and return to the beginning of a disc.
Note: With a Blu-ray and DVD Disc, Video information
from the disc will be muted during the Stop Mode,
but will resume when the (Play) Push-button
is pressed and playback starts. Using the Pause
Push-button instead of the Stop Push-button, will
retain the video on the screen for viewing. It is not
advisable to keep the MVP881BR in the Stop Mode
(one push-button press) for any length of time as
the Laser Transport is still active.
On Screen Icon Display
There are On-Screen Icons available to indicate the
current audio transport operating conditions and the
Audio/Video Status. Some On-Screen Icons also pro-
vide the ability to make changes to the disc currently
being played. These On-Screen Icons are accessible by
pressing the DISP/TIME Push-button on the supplied
Remote Control.
For each of the disc types played there is at least
one On-Screen Icon. If there are more than one On-
Screen Icons for a given disc type, they are accessed
by additional presses of the DISP/TIME Push-button.
Refer to figures 38 and 39.
Once the On-Screen Icon appears, changes to
items such as the Track Playing, the Chapter Playing,
the Group Playing, the Elapsed Time into the disc
or the Audio Mode, etc. may be accomplished. The
highlighted item or another item can be selected by
using the DIRECTIONAL, NUMERIC and SELECT
Push-buttons on the Remote Control. After the desired
changes have been made, the last press of the DISP/
TIME, AUDIO or SEARCH Push-button will switch
off the On-Screen Icon.
Video Disc Direct Title Selection
The MVP881BR Front Panel Display indicates the
Disc Title currently playing. Use the Remote Control
NUMERIC Push-button(s) to enter the desired Title
Number.
Note: The desired disc Title may also be selected by us-
ing the Search Function. Press the SEARCH Push-
button twice on the Remote Control and the Title
On-Screen Icon appears, then use the NUMERIC
Push-buttons to select the desired Title.
Video Disc Direct Chapter Selection
The MVP881BR Front Panel Display indicates the
Disc Chapter currently playing. Press the SEARCH
Push-button on the Remote Control once and the
Chapter On-Screen Icon appears then use the NU-
MERIC Push-buttons to select the desired Chapter.
DVD-Audio Direct Track Selection
The MVP881BR Front Panel Display indicates the
Disc Track currently playing. Use the Remote Control
NUMERIC Push-button(s) to enter the desired Track
Number.
Note: The desired disc Tracks may also be selected by
using the On-Screen Icon. Press the SEARCH
Push-button on the Remote Control and then NU-
MERIC Push-buttons.
DVD-Audio Group/Track Selection
To select a desired Group from a DVD-Audio Disc on
the MVP881BR, press the DISP/TIME Push-button to
access the On Screen Icon. Press the Right or Left
Directional Push-buttons to highlight either the Group
or Track On-Screen Icon. Use the Remote Control
NUMERIC Push-button(s) to enter the desired Track
Number followed by the SELECT Push-button.
SACD and CD Direct Track Selection
The MVP881BR Front Panel Display indicates the
Disc Track currently playing. Use the Remote Control
Figure 38
Figure 39
To Next Page
Loading...