24
320/407/500/600.41912-ENG
5. Periodic, Routine Care & Maintenance
Most sites on which the Shear may be operated are by their nature extremely dirty. You
will see from the following Routine and Periodic Maintenance Schedule that emphasis is
placed on regularly cleaning some aspects of the Shear.
Should you decide against a service contract, ensure you conduct periodic maintenance.
5.1. Warnings
• For electrical adjustments and/or inspections, use Qualied Personnel, familiar
with the latest I.E.E. Regulations, or local equivalent.
• Wear full protective clothing when carrying out maintenance on this Shear.
• Do not modify in any way, the mechanisms or intended operation of this equipment.
• For safety and to achieve optimum performance only use genuine JMC Recycling
Systems Ltd approved parts. Use of non-approved parts may invalidate the
warranty.
5.2. Hydraulic Fluid
5.2.1. Storage, Handling & Disposal
• Storehydraulicuidsundercoverawayfromsourcesofheat.
• Dispense carefully into clean containers and avoid contact with skin or eyes.
• Uselocalofcialcollectionpointsfordisposal.Donotpollutedrainsorsoil.
• Useduidsposeahigherhealthriskandsuitablemeasuresshouldbetakento
avoid continuous or repeated contact with them.
5.2.2. First Aid Measures
• EYE: Flush with water for 15-20 minutes. Seek medical attention if irritation
develops.
• SKIN: Wash immediately with soap and water. Remove contaminated clothing
and launder before reuse. Discard shoes and leather articles saturated with the
product. Obtain medical advice if irritation occurs.
• INHALATION: Remove exposed person to fresh air. If breathing is laboured give
oxygen.Ifbreathinghasstoppedapplyarticialrespiration.Getimmediatemedical
attention.
• INGESTION: DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water.
If vomiting does occur, keep head below hips to reduce risk of aspiration. Get
immediate medical attention.
To Next Page
Loading...