McIntyre 407 - 8 Ordering Spare Parts; Record Keeping; Useful Contacts

54
320/407/500/600.41912-ENG
9. Record Keeping
9.1. Useful Contacts
If you require any additional generic safety or operational information on the use of
Alligator Shears, or other scrap metal processing equipment, then the following contacts
may be of assistance:
British Metals Recycling Association
16 High Street, Brampton
Huntington, Cambs, UK PE28 4TU
Tel: +44 (0) 1480 455249 Fax: +44 (0) 1480 453680
www.recyclemetals.org email: admin@recyclemetals.org
UK Health and Safety Executive (HSE)
HSE Infoline Tel: UK 08701 545500 Fax: UK 02920 859260
www.hse.gov.uk
Bureau of International Recycling (BIR)
Avenue Franklin Roosevelt, 24,
B-1050 Brussels, Belgium
Tel: +32 2 627 5770, Fax: +32 2 627 5773
www.bir.org email: bir.sec@skynet.be
Institute of Scrap Recycling Industries, Inc (ISRI)
1325 G Street NW, Suite 1000, Washington DC 20005-3104, USA
Tel: +1 202/737-1770, Fax:+ 1 202/626-0900
www.isri.org email: isri@isri.org
American National Standards Institute (ANSI)
1819L Street, NW, Washington, DC 20036, USA
Tel: +1 202/293-8020, Fax: + 1 202/293-9287
General enquiries: + 1 202/642-4900
www.ansi.org
Occupational Safety & Health Administration (OSHA)
OfceofPublicAffairs–RoomN3647
200 Constitution Avenue
Washington, DC 20210
Tel: +1 202/693-1999
www.osha.gov
JMC Recycling Systems Ltd
Unit 2, Harrimans Lane, Dunkirk, Nottingham, England NG7 2SD
Tel: UK +44 (0) 115 940 9630 Fax: UK +44 (0) 115 979 1478
www.jmcrecycling.com email: info@jmcrecycling.com