McIntyre 407 - Declaration of Conformity

Declaration of Conformity
We Declare that the machinery detailed below complies with the following directives:
 Machinery Directive - 2006/42/EC
 Low Voltage Directive - 2006/95/EC
 EMC Directive - 2004/108/EC
This Machine is designed for use in the following Explosive
Atmosphere Environment -: Safe Area Only
Machine Description: .........................................................
Serial Number: .........................................................
Manufacturer: JMC Recycling Ltd
Address: Unit 2, Harrimans Lane
Dunkirk, Nottingham,
NG7 2SD
UK
The following Transposed Harmonised Standards have been applied in the design and
construction of this machine:
EN 349: Safety of Machinery - Minimum gaps to avoid crushing parts of the human body
EN 953: Safety of Machinery – General Requirements for the design and construction of xed and
movable guards.
EN ISO 4413:SafetyofMachinery–Safetyrequirementsforuidpowersystems.
EN ISO 11200: Acoustics - Guidelines for noise emitted by machinery and equipment
EN ISO 12100: SafetyofMachinery–Basicconcepts,generalprinciplesfordesign,riskassessment
and reduction.
EN ISO 13857: Safety of Machinery – Safety Distances to prevent danger zones being reached by
upper and lower limbs.
EN 60204 : SafetyofMachinery-Electricalequipmentofmachines–generalrequirements.
The Manufacturer stated above, holds the Technical Construction File for this equipment.
Name: Philip Pownall
Position: Managing Director
Date: ......................
Signed on behalf of the manufacturer:
(The responsible person)