McLaughlin Vision GX2 - Page 31

- 29 -
Depth measurement Press DEPTH key after pinpointing the location.
Decide the place of the starting point. Press Gain , locate that circumference.
manhole
Streetlight
Power /
telephone
Trace a line from the starting point to have sensitivity.
Accuracy of the depth measurement using the passive modes is unreliable.
Always expose the utility lines by exposing in a nondestructive manner before
excavation.
WARNING
Press Depth key.
When street light is
lighting, 50 / 60Hz is
available.
Place the Receiver
close to the cable riser.
RAD auto search is
effective.