IM 985-1 / Page 27 of 36
Wireless Temperature Control (T9000)
The T9000 Wireless Temperature Control is designed
to provide precision temperature control without the
installation labor and expense of wiring.
• Powered by AA batteries
• Mounts in any suitable location that will provide
good temperature control.
• Large LCD display provides the user with
current room temperature, set point temperature,
time, program interval, and other system status
information.
For detailed installation, operation refer to Operation &
Maintenance Bulletin OM 897.
Figure 19. T9000 Overview
The second part of the T9000 system is called a Remote
Control Node or “RCN”. An RCN interfaces with
specicdesiredHVACequipment,andcommunicates
with its thermostat using unlicensed 900 MHz, radio
frequency energy. At the time of installation, the T9000
thermostat is linked to one or more RCN controls. The
thermostat and RCN that have been linked will not
interfere with, or be affected by, any other thermostat
or RCN in adjacent rooms, apartments, or neighboring
homes.
Remote Control Node (RCN)
Used with the Wireless Temperature Control, the
RCNinterfaceswithspecicHVACequipment,and
communicates with its thermostat using unlicensed
900 MHz, radio frequency energy. Contact your local
McQuay Representative for details.
Programmable Non-programmable
To Next Page
Loading...
Need help?
General