To Next Page
B
Benjamin DominguezAug 6, 2025
What to do if my McQuay R410A SINGLE COMPRESSOR compressor does not start?
- DDiana HumphreyAug 7, 2025
If the McQuay Chiller's compressor isn't starting, first check the power supply. If that's not the issue, look for blown fuses or tripped circuit breakers, and replace or reset them after correcting the fault. Also, inspect for defective contactors or coils, repairing or replacing as necessary. Ensure no safety devices have tripped, and if they have, determine the cause and correct it before restarting. Check all wire connections and tighten any loose terminal screws. If none of these steps work, the compressor itself may be faulty, and you should contact your local dealer.
General
