IM 1068 / Page 4 of 32
Dimensions – Inches
Unit Size A B C D E F G H J K L M N P R
007–012 48 2½ Min. 7¼ Min. 36¼ 5¾ 24½ 13
11
⁄
16
21 3
1
⁄
2
-5½ Adj. 1¾ 8 1 45¾ 25 36½
019 60 2½Min. 8½Min. 46¼ 6⅞ 27⅜ 15⅞ 24 4-6Adj. 3 9¼ 5/8 59½ 27¾ 46¾
Wall Opening Requirements
Before installing the unit, check the wall opening to be sure
the wall sleeve will slide in unobstructed. The rough opening
should measure 25'' x 36½'' (635mm x 927mm) indoors and
14½" x 36½" (368mm x 927mm) outdoors for sizes 007–012
and 27¾''x 46¾'' (705mm x 1187mm) indoors and 16⅜" x 46¾"
outdoors (415mm x 1187mm) outdoors for sizes 019 as shown
below. The wall box is designed to be mounted on the oor
but may be located above the oor line to clear obstructions.
Without cabinet modications, the wall box can be placed up to
1'' (25mm) above the oor. The standard adjustable kickplate can
be telescoped to hide the space below the wall box. Complete
wall box installation instructions can found on page 5.
Figure 2: Unit and Wall Box Opening Dimensions
Sheet metal parts, self-tapping screws, clips and such items
inherently have sharp edges, and it is necessary that the
installer exercise caution. This equipment is to be installed
only by an experienced installation company which employs
trained personnel.
CAUTION
!
E
LC
M
J
K
H
A
D
F
G
B
Unit Size A B C D E F G H J K L M N P R
007–012 1219 64 Min. 184 Min. 921 146 648 348 533 89-140 Adj. 44 203 25 1162 635 927
019 1524 64 Min. 216 Min. 1175 175 695 403 610 102-152 Adj. 76 235 16 1151 705 1187
Dimensions – mm
Table 1: Unit Dimension