MDC XT 10E - Service Schedule

www.marketdirect.com.au
I
Ph: 1300 494 494 I Contents 86
Service Schedule
500KM FIRST SERVICE
CHECKED
Hitch
• Check hitch bolts to 90Nm.
• Lubricate with high temp bearing grease
Handbrake
•
Inspect and adjust handbrake
Brakes &
Bearings
•
Inspect and adjust brakes. Check bearings are well greased and
crown nut is correctly tightened.
Wheel nuts
•
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres
•
Inspect for abnormal wear, damage, and pressure
General fixings
•
Ensure no loose fittings
Seals & Latches
•
Check all seals on doors and hatches compress 30-50%. All seals in
serviceable condition and free of damage.
Suspension
•
Grease bushes and check for play.
• Check torque on suspension hanger bolts (190nm)
• Check retaining chain shackles tight.
Service Centre:
Notes:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________