MDG ATMe - Technical Specifications

ATMe, Haze Generator
User Guide, Rev: C/e, March 2023 27 / 33
Technical Specifications
Series
ATMOSPHERE
APS
Series
Total Running Time
:
2
3 hours at 2.76 bar / 40 psi
46 hours at 1.38 bar / 20 psi
Haze colour:
Pure white
Particle size:
0.5 to 0.7 microns
Fluid consumption:
100 m
l (3.24 oz / 0.029 US gal) per hour at 2.76 bar / 40 psi
55 ml (1.62 oz / 0.0145 US gal) per hour at 1.38 bar / 20 psi
Fluid type:
MDG
Neutral
TM
Fog Fluid ONLY
M.S.D.S. available on request
Fluid reservoir:
2.5 l (0.66 US gal) bottle
Gas type:
Industrial Grade CO
2
or N
2
Gas pressure input:
4.15 bar / 60 psi max
Gas consumption:
0.3
6 kg (0.79 lb) per hour at 2.76 bar / 40 psi
0.18 kg (0.4 lb) per hour at 1.38 bar / 20 psi
Automatic Purging System™:
Standard feature
Warm-up time:
8 minutes
Operating voltage:
1
00-240 VAC, 50/60Hz, 1 phase
Ground / Earth connection REQUIRED
Power consumption:
715 W nominal (550-1400 W)
Control signal:
Manual (4 buttons keyboard + LCD)
USB (
diagnostic & Bootload)
DMX / RDM Protocol
Noise emission (at 1 m/3.3 ft)
45 dB, Theater Mode Off
Operating temperature:
0 ºC to 50 ºC (32 ºF to 122 ºF)
Operating humidity:
90 % relative humidity @ 50°C (122 °F), non-condensing
Storage temperature:
-40 ºC (-40 ºF) to 60 ºC (140 ºF)
Storage humidity:
80% relative humidity @ 60 ºC (140 ºF)
Approval
CE, CSA and UL (cQPSus LR1268), CB Scheme
Dimensions
30 cm (12”) H x 18 cm (7”) W x 68,5 cm (27”) L
Weight:
16.8 kg (37 lb)
Shipping Weight:
22
kg (48.5 lb) without flight case
30.5 kg (67 lb) with flight case