DC8xD MK3 GENSET CONTROLLER USER MANUAL
5
1.Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start,
Stop, Parameters monitoring, faults-checking as well as data setting.
4.3inch colorful LCD screen display with brand new UI design is adapted in this
controller that the relative failures can be displayed directly. All the parameters can
be displayed by simulated indicators and words. Besides, LCD screen can display
various faults in the same time that the genset will be stopped once it can’t work
smoothly.
There are Simplified Chinese, Traditional Chinese, English, Spanish, Russian
interface options, more language can be set according to user’s request. All the
parameters can be configured through the front face buttons or use programmable
interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of
auto control system of gensets.
2.Main Features
There are four Models under DC8xD MK3 series.
DC80D MK3: used for single machine automation. Start/Stop through remote
start signal.
DC82D MK3: Based on DC80D MK3, it adds Mains monitoring and AMF
(Mains/Generator automatic switching control), especially suitable for the automation
system composed by mains and genset.
DC80DR MK3: Based on DC80D MK3, it adds RS485 port.
DC82DR MK3: Based on DC82D MK3, it adds RS485 port.
Dual core 32bit high performance single chip microcomputer.
4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set
if necessary.
Indicator and number display through UI surface.
Acrylic material is adapted to protect the screen.
Silicone panels;
USB Port: parameters can be set even without power through USD port to monitor
in real time.
With RS485 communication port, can achieve “Three Remote” functions via
MODBUS protocol.
Various kinds of parameters display.
Input/output function, status can be shown directly.
More categories of surface setting.
Real time clock inside.
Maintenance countdown function, can set maintenance timing or date.
The black box function can save the relevant parameters of the unit when the fault
alarm occurs in real time, and it is convenient to find the cause of the fault.
Totally 7 relay’s output, among which 5 relay output can be self-configurable, each
relay can be set as max 50 functions, besides, there are 2 groups as non-contact
terminals.
5 relays can be set as switch value input, and function configurable.
3 sensor simulation input connectors, various kinds of units can be set.
Sensor can be self-defined by front face button or PC software.
To Next Page
Loading...
Need help?
General
