Mebay DC8-D MK Series User Manual

DC8xD MK3 GENSET CONTROLLER USER MANUAL
6
 Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
 Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
 Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and
perfect failure display and protection.
 Standard water-proof rubber gasket. The waterproof can reach IP54
 Module design: All the connections are adapted with European connectors so that
installation, connection, repair and replacement can be more easily.
3.Parameters Display
 Engine RPM
 Engine oil pressure
 Engine temperature
 Engine fuel level
 Engine battery voltage
 Charging voltage
 Mains Frequency (only for DC82D MK3)
 Mains phase voltage L-N (only for DC82D MK3)
 Mains phase voltage L-L (only for DC82D MK3)
 Generator 3 Phase voltage L-N
 Generator 3 Phase voltage L-L
 Generator phase
 Generator 3 phase current A
 Generator Frequency Hz
 Generator Power Factor COS φ
 Generator active power KW
 Generator apparent power KVA
 Generator reactive power K Var
 Real-time load rate %
 Current load rate%
 Average loading rate %
 Current consumption KWH
 Total consumption KWH
 Total Crank times
 Current running time
 Total running time
 Maintenance notice
 5 switches input status display
 Output status display of 7 relays
Protection
 Over speed
 Under speed
 Low oil pressure
 High temperature
 Low fuel level
 Low oil level
 External emergency alarm

Mebay DC8-D MK Series Specifications

General

Brand	Mebay
Model	DC8-D MK Series
Category	Controller
Language	English