EasyManua.ls Logo

Mec MME25 - Page 26

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 23 Mast Series - Operator’s Manual
April 2021Section 7 - Function Tests
Move up and hold the platform up / down switch. Raise the platform to the highest position and
measure the platform height
Result: The platform continued to rise to a height of about 20 ft / 6 m (MME20), 25 ft / 7.5 m
(MME25).
Turn the indoor/outdoor switch to outdoor position.
Result: The alarm should sound.
Turn the indoor/outdoor switch to indoor position fully lower the platform.
Turn the key switch to platform control position.
Turn the indoor/outdoor switch to outdoor position.
Press the lift function select button.
Press and hold the function enable switch on the control handle.
Slowly move the control handle in the direction indicated by the yellow arrow. Raise the platform
to the highest position and measure the platform height
Result: The platform height shall not exceed 16 ft / 4.8 m (MME20), 20 ft / 6 m (MME25).
Turn the indoor/outdoor switch to indoor position
Press and hold the function enable switch on the control handle.
Slowly move the control handle in the direction indicated by the yellow arrow. Raise the platform
to the highest position and measure the platform height
Result: The platform continued to rise to a height of about 20 ft / 6 m (MME20), 25 ft / 7.5 m
(MME25).
Turn the indoor/outdoor switch to outdoor position.
Result: The alarm should sound.
Turn the indoor/outdoor switch to indoor position. Fully lower the platform.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.

Other manuals for Mec MME25

Related product manuals