Medela Symphony User Manual (English)

Other manuals for Medela Symphony

User Manual27 pages

Service Instructions7 pages

Service Manual6 pages

Quick Start Instructions2 pages

Instructions For Use – Hospital Use244 pages

Instructions62 pages

Manual126 pages

Quick Instructions2 pages

Instruction Sheet2 pages

Quick Start Guide2 pages

Questions and Answers:

T
tonirodriguezAug 26, 2025
Why is there low or no suction with my Medela Symphony?
- B
  Brenda AllenAug 26, 2025
  Low or no suction with your Medela Breast Pump can occur due to several reasons. Ensure you've assembled the pump set according to the instructions. Verify that all connections to the pump set and breast pump are secure. Make sure the breast shield creates a complete seal around the breast. Also, confirm that the pump set components are clean, undamaged, and correctly assembled: * Check that the tubing ends are firmly connected. * Ensure the tubing isn't kinked or trapped during expression. * All components must be completely dry before pumping.
S
seanmooreAug 26, 2025
What to do if Medela Symphony Breast Pump motor is not running?
- M
  Michael MartinAug 27, 2025
  If the motor of your Medela Breast Pump isn't running, check the following: Ensure the pump is connected to a power source or that the battery has power. Verify that the device is switched on. Confirm that the program card is correctly inserted into the card compartment located on the back of the breast pump.
Q
qcombsAug 27, 2025
Why is there low or no suction in my Medela Breast Pump?
- J
  Jason BeckerAug 27, 2025
  Low or no suction in your Medela Breast Pump can be caused by incorrect assembly, loose connections, or parts that are not completely dry. Ensure the pump set is assembled correctly, and all connections are secure. Make sure the breast shield forms a complete seal. The tubing ends should be firmly connected to the connector lid and the Symphony cap opening. The Symphony cap must be firmly fitted to the breast pump membrane to create a seal. Check that the membrane is intact and correctly placed in the connector, with the connector lid properly closed. Avoid kinking or trapping the tubing. Ensure all components are completely dry.
C
Christopher WardAug 27, 2025
What to do if my Medela Symphony motor is not running?
- T
  Tina FitzpatrickAug 27, 2025
  If the motor of your Medela Breast Pump is not running, take these steps: - Check if mains power or battery is available. - Ensure the device is switched on. - Verify the program card is correctly inserted into the card compartment on the back of the breast pump.
J
joshuadiazAug 27, 2025
How to fix a Medela Breast Pump that is not running?
- G
  Gregory StevensonAug 27, 2025
  If your Medela Breast Pump isn't running, check the following: confirm that the electrical outlet is working or the battery has power. Ensure the device is switched on. Verify that the program card is correctly inserted into the card compartment on the back of the breast pump.
S
Stephanie DaltonAug 28, 2025
How to fix Medela Symphony Breast Pump not turning on?
- A
  alice57Aug 28, 2025
  If your Medela Breast Pump isn't turning on, check the following: ensure the electrical outlet is working or the battery has power. Also, make sure the device is switched on and that the program card is correctly inserted into the card compartment on the back of the pump.
C
crystaltrujilloAug 28, 2025
How to clean condensation or milk in tubing of Medela Symphony Breast Pump?
- W
  William EvansAug 28, 2025
  If you notice condensation or milk in the tubing of your Medela Breast Pump, turn off the pump and unplug it from the power source. Wipe the pump with a damp cloth. Clean the tubing, and if necessary, clean the pump kit. Ensure all components are completely dry before reassembling the breast pump and kit.
D
Donald WaltonAug 29, 2025
How to troubleshoot Medela Symphony Breast Pump if it is not running?
- J
  jeanhowellAug 29, 2025
  If your Medela Breast Pump isn't running, verify the following: * Confirm that the electrical outlet is working or the battery has enough power. * Ensure the device is switched on. * Check that the program card is correctly inserted into the card compartment on the back of the breast pump.
K
Katherine MahoneyAug 29, 2025
What to do if Medela Symphony has low or no suction?
- E
  Eric BaileyAug 29, 2025
  If your Medela breast pump has low or no suction, check the valve and membrane for chips, cracks, holes, or tears and replace if needed. Ensure the membrane lays flat on the valve during reassembly. Inspect the breastshield and connector for cracks and secure attachment. Also, inspect the tubing adapter and Symphony membranes for wear or tears, replacing if necessary. If suction doesn't improve, contact Medela Customer Service at 1-800-435-8316.
K
Katie WatsonAug 29, 2025
How to fix a Medela Symphony when the motor is not running?
- K
  Keith SalazarAug 29, 2025
  If the motor of your Medela Breast Pump isn't running, check if mains power or battery is available and that the device is switched on. Also, verify that the program card is correctly inserted in the card compartment on the back of the breast pump.

Medela Symphony Specifications

General

Type	Hospital-grade electric breast pump
Battery Option	No
Double Pumping	Yes
Technology	2-Phase Expression Technology
Power	100-240 V, 50/60 Hz
Power Source	AC Adapter
Compatibility	Compatible with Medela breast shields and bottles
Programs	2-phase expression (stimulation and expression modes)
Weight	7.05 lbs (3.2 kg)
Hygiene	Closed system