To Next PageTo Next Page
What to do if my Medela Symphony is not running?
If your Medela Breast Pump isn't running, first check if the electrical outlet or battery has power. Then, make sure the device is switched on. Finally, verify that the program card is correctly inserted into the card compartment on the back of the breast pump.
Why is there low or no suction on my Medela Breast Pump?
To address low or no suction with your Medela Breast Pump, ensure the pump set is assembled correctly according to the instructions. Verify all connections of the pump set and breast pump are secure. Confirm the breast shield forms a complete seal around the breast. The white valve membrane must lie flat against the yellow valve head, and both should be clean and undamaged. Ensure the tubing ends are firmly connected to the connector and the opening in the membrane cap. The protective membrane and membrane cap should be correctly assembled and the membrane cap is firmly fitted to the breast pump membrane to form a seal and that the protective membrane is intact. Avoid kinking or trapping the tubing during expression, and ensure all components are completely dry.
How to troubleshoot Medela Breast Pump when the motor is not running?
If the motor of your Medela Breast Pump isn't running, first check that mains power or a battery is available. Next, make sure the device is switched on. Finally, verify that the program card is correctly inserted in the card compartment on the back of the breast pump.
What to do if my Medela Symphony Breast Pump is not turning on?
If your Medela Breast Pump is not turning on, check the following: * Ensure the electrical outlet is working or the battery has power. * Verify that the device is switched on. * Confirm the program card is correctly inserted into the card compartment on the back of the breast pump.
What to do if Medela Symphony Breast Pump has low suction?
If you experience low or no suction with your Medela Breast Pump, ensure the pump set is assembled correctly, following the instructions in the manual. Verify all connections of the pump set and breast pump are secure. Confirm that the breast shield forms a complete seal around the breast. Check that the white valve membrane lies flat against the yellow valve head, and both are clean and undamaged. Ensure the tubing is firmly connected to the connector and the opening in the membrane cap. The protective membrane and membrane cap should be correctly assembled and the membrane cap is firmly fitted to the breastpump membrane to form a seal. The protective membrane must be intact. Avoid kinking or trapping the tubing during expression, and ensure all components are completely dry.
How to fix Medela Symphony if the motor is not running?
If the motor of your Medela Breast Pump isn't running, check if mains power or battery is available. Ensure the device is switched on. Verify that the program card is correctly inserted in the card compartment on the back of the breast pump.
What to do if there is low suction on Medela Symphony Breast Pump?
To address low or no suction with your Medela Breast Pump, first, ensure the pump set is assembled correctly as per instructions. Verify that all connections of the pump set and breast pump are secure. Confirm the breast shield creates a complete seal around the breast. Check that the white valve membrane lies flat against the yellow valve head and both are clean and undamaged. Make sure the tubing is firmly connected to the connector and the opening in the membrane cap. Also, the protective membrane and membrane cap should be correctly assembled and the membrane cap is firmly fitted to the breast pump membrane to form a seal, ensuring the protective membrane is intact. Avoid kinking or trapping the tubing during expression, and ensure all components are completely dry.
Why is there no suction on my Medela Symphony?
If you're experiencing low or no suction with your Medela Breast Pump, try the following: * Ensure the pump kit is assembled according to the instructions. * Verify all connections of the pump kit and breast pump are secure. * Confirm the breast shield forms a complete seal around the breast. * Check that the white valve membrane lies flat against the yellow valve head. * Make sure the valve head and membrane are clean and undamaged. * For Symphony models, ensure the tubing ends are firmly connected to the connector and the opening in the membrane cap, the protective membrane and cap are correctly assembled and fitted to form a seal, and the protective membrane is intact. * Avoid kinking or pinching the tubing during expression. * All components must be completely dry.
How to clean condensation in Medela Symphony tubing?
If you notice condensation or milk in the tubing of your Medela Breast Pump, turn off the pump and unplug it from the power source. Wipe the pump with a damp cloth. Clean the tubing according to the cleaning instructions. If necessary, clean the pump kit. Ensure all components are completely dry before reassembling the breast pump and kit.
How to fix low suction on Medela Symphony Breast Pump?
To address low suction in your Medela Breast Pump, ensure the pump kit is assembled correctly according to the instructions. Verify that all connections of the pump kit and breast pump are secure. Confirm the breast shield forms a complete seal around the breast. Check that the white membrane lies flat against the yellow valve head and that both are clean and undamaged. Ensure the tubing ends are firmly connected to the connector and the membrane cap opening. The protective membrane and cap should be correctly assembled and the membrane cap must be firmly fitted to the breast pump membrane to form a seal, ensuring the protective membrane is intact. Avoid kinking or pinching the tubing during expression, and ensure all components are completely dry.
General| Type | Hospital-grade electric breast pump |
|---|---|
| Battery Option | No |
| Double Pumping | Yes |
| Technology | 2-Phase Expression Technology |
| Power | 100-240 V, 50/60 Hz |
| Power Source | AC Adapter |
| Compatibility | Compatible with Medela breast shields and bottles |
| Programs | 2-phase expression (stimulation and expression modes) |
| Weight | 7.05 lbs (3.2 kg) |
| Hygiene | Closed system |
Details of the Symphony breast pump's main unit, including LCD and controls.
Steps for connecting the power cord and turning on the Symphony breast pump.
Step-by-step guide for assembling the breast pump kit components.
Guide to testing breast shield fit and selecting the optimal size for comfort.
Essential steps to perform before starting a pumping session, including hand washing.
How to attach pump kit components and set the vacuum level for comfort.
Steps to safely end pumping, disconnect the pump, and store milk.
Instructions for using the Standard Program Card for milk production.
Guide to using the Preemie+ Program Card for milk initiation.
How to use the INITIATE program for milk production initiation.
How to use the MAINTAIN program for ongoing milk production.
Troubleshooting steps for when the breast pump fails to turn on.
Diagnosing and resolving problems related to low or absent suction.
Understanding Symphony error codes displayed on the LCD and their solutions.
